Biodiesel exhaust particle airway toxicity and the role of polycyclic aromatic hydrocarbons.

Renewable alternatives to fossil diesel (FD) including fatty acid methyl ester (FAME) biodiesel have become more prevalent. However, toxicity of exhaust material from their combustion, relative to the fuels they are displacing has not been fully characterised. This study was carried out to examine particle toxicity within the lung epithelium and the role for polycyclic aromatic hydrocarbons (PAHs). Exhaust particles from a 20% (v/v) blend of FAME biodiesel had little impact on primary airway epithelial toxicity compared to FD derived particles but did result in an altered profile of PAHs, including an increase in particle bound carcinogenic B[a]P. Higher blends of biodiesel had significantly increased levels of more carcinogenic PAHs, which was associated with a higher level of stress response gene expression including CYP1A1, NQO1 and IL1B. Removal of semi-volatile material from particulates abolished effects on airway cells. Particle size difference and toxic metals were discounted as causative for biological effects. Finally, combustion of a single component fuel (Methyl decanoate) containing the methyl ester molecular structure found in FAME mixtures, also produced more carcinogenic PAHs at the higher fuel blend levels. These results indicate the use of FAME biodiesel at higher blends may be associated with an increased particle associated carcinogenic and toxicity risk.

In-Cylinder Polycyclic Aromatic Hydrocarbons Sampled during Diesel Engine Combustion.

Polycyclic aromatic hydrocarbons (PAHs) are potentially carcinogenic pollutants emitted by diesel engines, both in the gas phase and adsorbed onto the surface of particulate matter (PM). There remains limited understanding of the complex and dynamic competing mechanisms of PAH formation, growth and oxidation in the gas phase, and their adsorption onto soot and how these processes impact on the abundance and composition of exhaust PAH. Therefore, this paper presents analysis of gas and particulate samples taken from the cylinder and exhaust of a diesel engine during combustion of fossil diesel with the 16 US-EPA priority PAH species identified and quantified. In-cylinder results showed that gas-phase PAHs were more abundant than soot-bound PAHs in the engine cylinder. The in-cylinder PAHs included 2- to 6-ring PAHs; however, 6-ring PAHs were not observed in the soot samples collected from the engine exhaust. Levels of both PM and the total in-cylinder PAHs decreased following a peak at 10 CAD ATDC but subsequently increased significantly during the late combustion phase. The B[a]P equivalence of PM in the engine cylinder increased during the period of early diffusion to late combustion phase, following an initial decrease during the period of premixed to early diffusion combustion.

Influence of unsaturation of hydrocarbons on the characteristics and carcinogenicity of soot particles.

This paper concerns the effect of unsaturation of hydrocarbons (single, double, and triple bonds) on soot particle characteristics (mass, number, and size) and on the carcinogenicity of soot particles. The soot particles were produced from oxygen-free pyrolysis of five hydrocarbons, namely: propane, propylene, ethane, ethylene, and acetylene. The characteristics of soot particles were measured with the aid of a differential mobility spectrometer (Cambustion-DMS-500) and measurement of soot mass concentration was confirmed using gravimetric filter measurements. The soot particle carcinogenicity was estimated from the emission quantities of total polyaromatic hydrocarbons (PAHs) and the toxicity equivalent factor (TEF) of each PAH. Oxygen-free pyrolysis of the hydrocarbon fuels was conducted in a laminar tube reactor within the temperature range of 1050 -1350oC at a constant nitrogen flow rate of 20 L/min and constant fuel flow rate of 1% (vol) on carbon-1 basis. The experimental results showed that increasing unsaturation of fuels from single to double and to triple bonds increased the mass concentration, particle size, number concentration, and carcinogenicity of soot particle notably at the initial temperature of 1050 oC. Increase in the pyrolysis temperature of the tube reactor from 1050 - 1350oC, increased the mass concentration and sizes of the soot particle while the number concentration and carcinogenicity of the soot particle decreased. There was a positive correlation between the soot particle number and the corresponding soot particle carcinogenicity, while a negative correlation was observed between the soot particle mass and size with soot particle carcinogenicity regardless of the pyrolysis temperature examined. The potential implication of these observations is that, low-temperature combustion (LTC) applications, aimed at reducing emissions of soot and NOx, could produce higher soot particle number concentration of higher carcinogenicity.

Effect of Solvent Extraction Parameters on the Recovery of Oil From Spent Coffee Grounds for Biofuel Production.

Spent coffee grounds (SCG) are a potentially valuable source of lipids for sustainable production of biofuels. However, there are several feedstock properties and solvent extraction parameters that can impact on the oil yield and quality, potentially reducing the possible environmental benefits of deriving oils from this waste stream. This study presents results of laboratory and pilot plant scale experimental investigations into lipid recovery from spent coffee, determining the effects of solvent extraction variables including duration, SCG-to-solvent ratio and SCG residual moisture. SCG samples from both the industrial production of instant coffee and retail coffee shops were characterized in terms of moisture content, particle size distribution and oil content to identify the impact of these variables on the efficiency of lipid recovery by solvent extraction. The dry weight oil content of the instant SCG samples ranged from 24.2 to 30.4% w/w, while the retail SCG samples contained considerably lower amounts of lipids with their oil content ranging between 13.4 and 14.8% w/w. The highest oil yields were found at an extraction duration of 8 h, while a moisture content of ~2% w/w led to increased yields relative to completely dry samples. A pattern of increasing acidity with decreasing extraction duration was observed, suggesting preferential extraction of free fatty acids (FFA), with the fatty acid (FA) profile of the oil found to be similar to lipids commonly utilized for biofuel production.

Ethyl Lithiodiazoacetate: Extremely Unstable Intermediate Handled Efficiently in Flow.

Ethyl diazoacetate (EDA) is one of the most prominent diazo reagents. It is frequently used in metal-carbene-type reactions. However, EDA can also be used as a nucleophile under base catalysis. Whilst the addition of EDA to aldehydes can be performed using organic bases, the addition of EDA to other carbonyl electrophiles requires the use of organometallics such as lithium diisopropylamide (LDA). The generated ethyl lithiodiazoacetate is highly reactive and decomposes rapidly, even at low temperatures. Herein, we report a continuous flow protocol that overcomes the problems associated with the instantaneous decomposition of ethyl lithiodiazoacetate. The addition of ethyl lithiodiazoacetate to ketones provides direct access to tertiary diazoalcohols in good yields.

Molecular structure of photosynthetic microbial biofuels for improved engine combustion and emissions characteristics.

The metabolic engineering of photosynthetic microbes for production of novel hydrocarbons presents an opportunity for development of advanced designer biofuels. These can be significantly more sustainable, throughout the production-to-consumption lifecycle, than the fossil fuels and crop-based biofuels they might replace. Current biofuels, such as bioethanol and fatty acid methyl esters, have been developed primarily as drop-in replacements for existing fossil fuels, based on their physical properties and autoignition characteristics under specific combustion regimes. However, advances in the genetic engineering of microalgae and cyanobacteria, and the application of synthetic biology approaches offer the potential of designer strains capable of producing hydrocarbons and oxygenates with specific molecular structures. Furthermore, these fuel molecules can be designed for higher efficiency of energy release and lower exhaust emissions during combustion. This paper presents a review of potential fuel molecules from photosynthetic microbes and the performance of these possible fuels in modern internal combustion engines, highlighting which modifications to the molecular structure of such fuels may enhance their suitability for specific combustion regimes.

Rapid Generation and Safe Use of Carbenes Enabled by a Novel Flow Protocol with In-line IR spectroscopy.

A powerful new continuous process for the formation and use of donor/acceptor-substituted carbenes is described. The safety profile of diazo group transfer on methyl phenylacetate was determined including kinetic studies in batch and in flow using in-line IR analysis. Batch work-up and liquid chromatography were circumvented by developing an optimized liquid/liquid flow separation method providing aryl diazoacetates in high purity. Fast screening of reaction conditions in flow with in-line IR analysis allowed rapid reaction optimization. Finally, a multistep process of diazo group transfer, extraction, separation and subsequent diazo decomposition combined with multiple X-H insertion reactions was established.

Synthesis of fluorinated catharanthine analogues and investigation of their biomimetic coupling with vindoline.

The syntheses of 20,20-difluorocatharanthine and congeners, starting from the naturally occurring catharanthine, are reported. The fluorinated catharanthine analogues were investigated as potential precursors to dimeric Vinca alkaloids of the vinflunine family. However, the biomimetic coupling of the fluorinated catharanthine derivatives with vindoline led to unexpected alkaloid structures, the formation of which was rationalized.

On the elucidation of the mechanism of Vinca alkaloid fluorination in superacidic medium.

Detailed investigations on one of the key steps of the superacidic fluorination of Vinca alkaloids that is the origin of C20' activation are reported. While two different pathways can be envisioned for the emergence of the transient secondary carbocationic intermediate, isotopic labeling experiments unambiguously revealed the involvement of a 1,2-hydride shift mechanism.

Diastereoselective formal total synthesis of (+/-)-triptolide via a novel cationic cyclization of 2-alkenyl-1,3-dithiolane.

A concise and diastereoselective formal total synthesis of triptolide, a natural product with a wide range of biological properties, is described. The key reaction is an unprecedented 6-endo-Trig cationic cyclization of a 2-alkenyl-1,3-dithiolane precursor induced by TMSOTf as Lewis acid.

Chiral Pyridine-Based Macrobicyclic Clefts: Synthesis and Enantiomeric Recognition of Ammonium Salts.

An achiral (3) and two chiral pyridine-based macrobicyclic clefts (4 and 5) have been prepared by treating 2,6-bis[[2',6'-bis(bromomethyl)-4'-methylphenoxy]methyl]pyridine (2) with the appropriate achiral and chiral glycols. Starting 2 was prepared by first treating 2,6-bis(hydroxymethyl)-4-methylphenol with 2,6-[(tosyloxy)methyl]pyridine followed by phosphorus tribromide. Achiral macrobicyclic cleft 3 formed a complex at 25 degrees C in 50% CH(3)OH/50% CHCl(3) (v/v) with a primary ammonium salt (log K = 3.15) as evidenced by a significant change in the (1)H NMR spectrum. Highly organized (S,S,S,S)-4, prepared by treating 2 with (1S,5S)-3-oxapentane-1,5-diol, exhibited recognition at 25 degrees C in 20% C(2)H(5)OH/80% 1,2-C(2)H(4)Cl(2) (v/v) for the (S)-enantiomer of alpha-(1-naphthyl)ethylammonium perchlorate (NapEt) over its (R)-form (Delta log K = 0.85). This high recognition factor probably reflects an increase in molecular rigidity by the introduction of a second macro ring on the monocyclic pyridinocrown ligand.